Chemtronics SODER WICK Repair Consumables

Click on above image to view full picture

More Views

  • Chemtronics SODER WICK Repair Consumables

Chemtronics SODER WICK Repair Consumables

Chemtronics Soldering Consumables

The wick is fabricated from high density copper strands which are precisely cross braided to eliminate oxygen penetration in the pores and therefore ensure fast and safe desoldering. The copper ensures optimum heat transfer via braid to the excess solder to quickly melt and suck it without damaging the circuit board.It desolders 40% faster than the conventional wick because of its high suction capabilities and eliminates residual flux on pcb.


Salient Features include Eliminates residual solder cleaning; Eliminates ionic contamination on the boards; Packaged in Vacuum – Packs and ESD-safe static dissipative bobbins; Minimizes heat damage to the board andRoHS compliance

Features
  • The Desoldering Wick enables you to give a high sucking power through its cross weaved copper.
  • Desolders 40% faster than the conventional wick.
  • Packaged in convenient Vacuum - Packs
Specifications
Product Size Colour 5’
1.5m
10’
3.0m
25’
7.5m
100’
30.5m
500’
30.5m
VacupakTM Application
Soder-WickR No Clean SD 1 .030”/0.8mm White 60-1-5 60-1-10       SW16015 SMD, Micro-Circuits
  2 .060”/1.5mm Yellow 60-2-5 60-2-10       SW16025 Small Pads, SMDs
  3 .080’/2.0mm Green 60-3-5 60-3-10       SW16035 Medium Pads
  4 .110”/2.8mm Blue 60-4-5 60-4-10       SW16045 Large Pads
  5 .145”/3.7mm Brown 60-5-5 60-5-10       SW16055 Terminals
  6 .210”/5.3mm Red 60-6-5           Large Lugs