Fisnar PPD130 Peristaltic Pump Dispenser

Click on above image to view full picture

More Views

  • Fisnar PPD130 Peristaltic Pump Dispenser

Fisnar PPD130 Peristaltic Pump Dispenser

Fisnar Automated Liquid Dispensing

Fisnar PPD130 Peristaltic Pump Dispenser offers an air-free dispensing mechanism. Air free dispensing is often required for accurate transfer of low viscosity liquids or volatile liquids. This technology is proven and these pumps are chosen to avoid contact with hazardous substances. The operator contact is limited and the PPD130 Peristaltic Pump Dispenser can dispense timed shots from 0.01 to 0-99.99 seconds with flow speeds of 0.01 - 6ml/min using Teflon tubing. The pump is reversible to provide snuff-back to prevent post-dispense dripping. This dispenser works in both Manual and Timed mode. In addition, the simple material load mechanism helps easy cleaning.

OR
The PPD-130 peristaltic pump dispenser transfers low viscosity liquids by pressure displacement applied to a turning rotor against a tube carrying material. Usually these pumps are chosen because the liquids are hazardous or difficult to work with and it is advisable to limit operator contact. Another reason is that peristaltic pumps are air-free.

Features
  • Air-free dispensing
  • Snuff-back prevents post-dispense dripping
  • Simple load mechanism also provides easy cleaning
  • Manual or Timed modes
  • Large digital LED display
  • Clean room compatible
Specifications
Size 7.18” x 3.20” x 6.73” (182.4 x 81.2 x 171mm)
Weight 6.6 lbs (3kg)
Input Voltage 220V, 50 Hz
Dispense time 0.01 - 99.99 seconds
Internal Voltage 5VDC
Cycle initiation Continuous & Timed
Rotor Speed up to 120 rpm (max.)
Flow speed 0.01 - 6ml/min. (Teflon tube)
0.1 - 20ml/min (Silicone tube)
Dispense pressure over 1.5Kg/cm2
Direction of pump both directions (Forward / Reverse)
Snuff-back programmable by reverse rotation
Digital display time count down
I/O connection for remote operation