Hakko Fr-702 Rework Station

Click on above image to view full picture

More Views

  • Hakko Fr-702 Rework Station

Hakko Fr-702 Rework Station

Hakko Soldering & Desodering Equipments

Hakko 702 B Rework Station is a four port rework station. The ports have two soldering irons, a de-soldering gun, and a hand piece for hot air SMD rework. The stations compact design saves a lot of bench space. Also, the station has a built-in double cylinder type vacuum generator that can provide a vacuum pressure of up to 80kPa(600mmHg), a suction flow of up to 15L/min, and an air flow up to 23L/Min. In addition, for soldering/desoldering purposes you can use a variety of tips or nozzles available in the Hakko series.

OR

4 Port Rework Station with 140 desoldering gun, M-type soldering iron and 670W hot air

It handles various soldering, desoldering and reworking by choosing proper handpieces from a selection of 7 types.

Other than the standard handpieces of 140W desoldering gun, M-type soldering iron and high power & large volume hot air, there are 4 more applications. Consumed tip nozzle and heating element can be replaced individually, and running cost is much lower than the composite type.

マイクロソルダリングから大容量はんだ付けに適したこて先

Desoldering gun
HAKKO FR-4101
140W
はんだ吸取器 HAKKO FR-4101
- 140 W high powers enable perfect desoldering for the components on multi-layer PWB.
- A wide selection of nozzle, with the addition of new types, is available for a variety of desoldering works.
Soldering iron M type
HAKKO FX-8801
65W
Soldering iron M type HAKKO FX-8801
- Takes T18 tip series with improved thermal conductivity
Hot air handpiece
 
670W
Hot air handpiece
- It enables quick removal of components with high power and large volume hot air for a various kinds of rework.
- Vacuum function with indicator makes it possible to remove components easily and safely.
 

Soldering iron L type
HAKKO FX-8805
65W
Soldering iron L type HAKKO FX-8805
 
N2 Soldering iron
HAKKO FX-8802
65W
N2 Soldering iron HAKKO FX-8802

One-hand Manual-solder-feed iron 

HAKKO FX-8803
65W
One-hand Manual-solder-feed iron HAKKO FX-8803


SMD hot tweezer
HAKKO FX-8804
65W
SMD hot tweezer HAKKO FX-8804

 

High-power Desoldering gun HAKKO FR-4101

Increasing the power to 140 W from 50 W of our previous models (HAKKO 474・475), it can make it easy to desolder on multi-layer PWB which was never an easy job, and it can also shorten the process time.
A wide selection of nozzle, with the addition of new types, is available for a variety of desoldering works.
- Long type nozzles for narrow space
- Oval shape nozzles for flat terminals
- SS type nozzles for micro land-patterns

 

Soldering iron HAKKO FX-8801/FX-8805

Thermal conductivity has been increased by reviewing external configuration and internal structure of 900 tip series.
Now T18 and T19 tip series are selectable depend on work environment.
 

 

Hot air handpiece

670 W high power and large volume hot air improves work efficiency.

・High power and large volume hot air for quick removal of components
ホットエアー
・New type of nozzles for improvement of temperature characteristics
The new nozzle improves work efficiency with uniform heating by hot air convection inside the nozzle which is created due to vents on the nozzle top. (only with BGA nozzles) ホットエアー
・Vacuum pickup function
The vacuum pick up function is to pick up a component with a suction pad and vacuum. It will pick a component only after the hot air melts solder joints. This can avoid an error to peel off the land by removing a component with excessive force. ホットエアー
・Pickup indicator lets you know the pickup timing at a glance!
By pre-setting pickup function, a component can be picked up automatically when solder is melted. Then, the indication comes up and the moment of picking up will be visible.
Even a component and solder joints cannot be seen as covered by a nozzle, easy and safe picking up is possible.
ホットエアー

 

N2 soldering iron HAKKO FX-8802

The N2 gas runs into the nozzle assembly and covers over the soldering tip. It prevents the soldering tip and the heater from being readily oxidized and performs great role as a preheating.
Two effects of N2 system, preventing oxidation or preheating effect, can improve soldering defects such as bridging, protrusion icicle, insufficient solder filling in PTH, etc.
T18 tips series are compatible with this application.
N2 soldering iron HAKKO FX-8802

 

Model No.FR-702
Power consumption 1,030W

・Station

Dimensions 370(W)×150(H)×220(D)mm
Weight 9kg

・Station (Soldering)

Output voltage AC 26V
Temperature range 50 to 480ºC
Temperature stability ±1ºC at idle temperature (When set to 200 to 480ºC)

・Station (Desoldering)

Output voltage AC 24V
Vacuum generator Vacuum pump, double cylinder type
Vacuum pressure 80kPa (600mmHg)
Suction flow 15L/min.
Temperature range 330 to 450ºC
Temperature stability ±5ºC at idle temperature

・Station (Hot air)

Power consumption 30W
Air flow 1 to 9 (5 to 115L/min.)L/min.
Temperature range 50 to 600ºC

・Soldering iron

Power consumption 65W (26V)
Tip to ground resistance <2Ω
Tip to ground potential <2mV
Heating element Ceramic heater
Standard nozzle Shape-B (No.T18-B)
Cord length 1.2m
Total length 222mm (with B tip)
Weight 52g (with B tip)

・Desoldering Gun

Power consumption 140W (24V)
Nozzle to ground resistance <2Ω
Nozzle to ground potential <2mV
Heating element Composite heater
Standard nozzle Φ1.0mm S type (No.N61-05)
Cord length 1.2m
Total length 168mm (with Φ1.0mm S type nozzle)
Weight 170g (with Φ1.0mm S type nozzle)

・Handpiece (Hot air)

Power consumption 670W
Total length 250mm
Weight 180g