Hakko FR 870 Rework Station

Click on above image to view full picture

More Views

  • Hakko FR 870 Rework Station

Hakko FR 870 Rework Station

Hakko Soldering & Desodering Equipments

Hakko FR 870 is an infrared board preheater that comes with 6 infrared halogen lamps with a power consumption of 460 W. FR 870 is used to raise the temperature of the PCB. A heated PCB allows the components to be soldered more easily with good results. This device is suitable in areas where there is medium to high mass board assemblies and that can sink a significant amount of energy. This device has a unique power mode that allows you to set the output manually or thermocouple mode.  The setting range for Power mode is 0-100%, whereas the setting range for T/C modem is 50 – 200 degree Celsius.

OR
  • Infrared pre-heater that provides the optimal heating effect over the whole work piece surface
  • Short heat up time realized by use of halogen lamps improves work efficiency
  • Non-contact system enables its application to double-sided boards
  • Auto Mode
    Auto mode provides three steps (Step 1-3) to create an optimal heating profile for the work in question, letting all operators consistently produce work of the same quality. Programs can be set for ten channels in each mode.
  • K Type Thermocouple makes it sensitive to the temperature
    Infrared halogen lamps provide powerful support for insufficient heat when reworking and mounting post-production add-ons

 

Specifications
Model No. FR870
Power Consumption 460W
Operation mode Power mode, T/C mode
Power auto mode, T/C auto mode
Setting range : Power mode 0-100%
Setting range : T/C mode 50-200°C
Setting range : Set time 0-999second
Heating element Halogen lamp
Effective heated area 190(W) x 80(D)mm
Heater area dimensions 248(W) x 140(D)mm
Work grid parrtitions 2
Temperature sensor K-type thermocouple
lamp lifetime 2000hour
Dimensions 290(W) x 100(H) x 308(D)mm
Weight 3.4kg