Kanon Digital Tool

Click on above image to view full picture

More Views

  • Kanon Digital Tool

Kanon Digital Tool

Kanon Automated Screwing Solutions

The Kanon Digital Wrenches display the torques in a digital display. The Data Print-Out Digital Torque Wrenches (DTC-EXL) have a digital display attached to the wrench. The Digital Torque Wrenches with connected display (DTC-N5EXL) and Digital Torque Drivers (DTDK-EXL) have a separate display which is not attached to the wrench body. The wrenches and drivers operate in clockwise and counter clockwise direction. Maximum and minimum torque levels can be defined. Torque readings can be stored in memory. They operate in three modes: Peak hold, Peak to peak-hold, and Run. Power supply is provided using two rechargeable “AA” type batteries and a charger. They can be continuously used for up to 20 hours.  


 The wrenches can be connected to the TPK printer. Optionally they can be connected to a computer. 

OR

 

 
 

DTC-EXL

Data Print-Out Digital Torque

Wrenches Newly designed, feature a multi-function digital read-out.

Features:
  • ±1% Accuracy over full range
  • Clockwise(CW) and Counterclockwise(CCW) operation
  • Min/Max settings
  • Memory for up to 100 torque values
  • Printer output to a TPK-3
  • PC interface (cable is optional)
  • Modes of operation - Peak Hold, Peak to Peak Hold, and RUN
  • 2 rechargeable "AA" batteries and charger
  • 20 hours continuous operation

 

DTDK-EXL

Digital Torque Driver With Connected Display

Display The Display is separate from the driver. Complete tightening control for small screws.

Features:
  • ±1% Accuracy over full range
  • Clockwise(CW) and Counterclockwise(CCW) operation
  • Min/Max settings
  • Memory for up to 100 torque values
  • Printer output to a TPK-3
  • PC interface (cable is optional)
  • Modes of operation - Peak Hold, Peak to Peak Hold, and RUN
  • 2 rechargeable "AA" batteries and charger
  • 20 hours continuous operation
  • Auto power-off
  • Display is detached from the driver

 

DTC-N5EXL

Digital Torque Wrench With Connected Display

The Display is separate from the wrench. The slender wrench body facilitates measuring lower torques.

Features:
  • ±1% Accuracy over full range
  • Clockwise(CW) and Counterclockwise(CCW) operation
  • Min/Max settings
  • Memory for up to 100 torque values
  • Printer output to a TPK-3
  • PC interface (cable is optional)
  • Modes of operation - Peak Hold, Peak to Peak Hold, and RUN
  • 2 rechargeable "AA" batteries and charger
  • 20 hours continuous operation
  • Auto power-off
  • Detached display

 

KDTA-SVH

Large Digital Torque Analyzers

Enhanced digital processor system that provides high performance with digital wrenches.

Features:
  • LED display eliminates reading errors.
  • Processor chip assures measurement with high reliability and accuracy.
  • The display unit angle can be adjusted approximately 90degress.
  • With AC 100-240V Power its operating temperature is around 0~40degress.

 

KDTA-SV

Digital Torque Analyzers

Features:
  • LED Display eliminates reading errors
  • Can be connected to various optional equipment (printer, personal computer, external input keyboard).
  • Saves time and helps speed up work.
  • Equipped with a kgf.cm/N.m selector switch.
  • Operating temperature: 5-35°C.
  • Printer output to a TPK-3.
  • PC interface (cable is optional).
  • Modes of operation - Peak Hold, Peak to Peak Hold, and Running torque.
  • Power source: AC100-240V 50/60Hz.

 

TPK-3

Standard Printer

Equipped to work with all the digital version of Torque Wrenches and analyzers, it indicates in or out of specification on the led display and printout.