Kilews Screw Counter( For Carbon Brush Screwdriver)
Kilews Screw Counter( For Carbon Brush Screwdriver)
The Kilews Screw Counter is used with screwdriver to track the screw count. It is available in two variants: for Brushless Screwdriver SKP-BC32HL and for Brush Screwdriver SKP-C32HL. It enables setting the list of screw, count of screw, time to fasten the screw, output time, and auto-learn functionality. The Auto-Learn functionality enables operators to work in situations where the actual time for fastening is not known due to unknown screw lengths or unknown screwdriver rotation speeds.
Features
- Facility to set Screw List, Screw Count, Screwing Time, Output Timing & Auto Learn function.
- Slow-Start function is able to set rotation speed and timing. It allows electric screwdriver to start under very low speed and stop at a normal speed.
- Selectable auto-reset retrieval or manual reset retrieval for setting up screw count.
- 5 sets of data can be stored. All 5 sets of data are able to be used interchangeably at the same time.
- Displaying the number of unfinished screw counts, user can add external sensor switch to prevent any operation error from neglect of fastening screws.
- Enable to connect with external PLC system to streamline production line to integrate with PLC. In order to resolve accurate counting on screw fastening and work together with PLC based process control system for electric screwdrivers, we integrate screw counter and power supply function into unique device which is a power supply itself and a screw counter as well.
- SKD-C32HL adds an Auto-Learning Function which allows user to operate it under the circumstance of unknown screw length and electric screwdrivers’ rotation speed, or when user needs to fasten screws with slow-start function at the same time.
Specifications
| Model | SKP-C32HL |
| Input Voltage | AC-110V~240V, 50/60Hz |
| Output Voltage | DC32V/20V15A |
| Count | 1~99 |
| Count method | Count-up/Count-down |
| Work with Sensor | ON/OFF |
| GATE Sensor | ON(2Sensors)/OFF(1Sensor) |
| Slow-Start Time Adjustable | 0~9.9 seconds |
| Slow-Start Speed Adjustable | 60%~100% Rated Speed |
| Running Time Limit-LO | 0~9.9 seconds |
| Running Time Limit-HI | 0~9.9 seconds |
| NG Alarm | On/Off/FF/EF with LED and buzzer |
| OK Alarm | On/Off/FF/EF with LED and buzzer |
| Auto ZERO | ON/OFF |
| External Inputs | Sensor/Reset |
| External Outputs | OK/NG/OK all |
| Screwdriver Control | Speed : HI/LO : SLOW START |
| Outside Dimensions | 150X48X130(mm) |
| Accessories | Power cord X1; Suspension bail X2 Terminal Block X1 |
| Applicable Models | SKD-C2000 series SKD-C5000 series SKD-C7000 series SKD-C8000 series |
Why Choose Sumitron ?
