Hakko Fr-400

Click on above image to view full picture

More Views

  • Hakko Fr-400

Hakko Fr-400

Hakko Soldering & Desodering Equipments


  • Heavy-duty Desoldering Tool with built-in vacuum pump

  • Quick and secure desoldering even on high heat capacity and high heat dissipation PWB with super power

  • Secure desoldering with valve function

  • Solder clogging was reduced featuring Anti Clogging Function



 
OR

Features

300 W tremendous power enables nearly impossible desoldering on PWB with high heat capacity and high heat dissipation property.

GOOD DESIGN AWARD 2015

300 W tremendous power makes incredible heating.

Increased heater powerFR-400 makes a big difference in rework process on inverter PWB for automotive device and power conditioner PWB for solar power generator that require high current.

Secure desoldering, valve function that suctions with high pressure

Suction starts 0.2 seconds after pulling the trigger for instance and high pressure suction to achieve complete desoldering.

Reduction of solder clogging

Improvement in heating core

Heating ability for backside of heating core is increased to ensure suctioned solder be carried to filter pipe and avoid solder clogging.

 

Featuring ACF (Anti Clogging Function)

ACF ensures suctioned solder be carried to filter pipe by keeping pump running for a second after releasing trigger.

Improvement in maintainability

Featuring new filter pipe 3 times larger than the previous model

The new filter pipe is 3 times larger than the previous model and applicable to operation on large components. This is not disposal type and for repeatable use.

Featuring new filter pipe 3 times larger than
the previous model

Easy heater replacement

Easy heater replacement by removing 3 screws on the part of heating core.

Easy heater replacement

Tool box for maintenance kit

A tool box that contains of maintenance tools such as cleaning pins for nozzle and heating core is provided for standard. The box can be set on the top of the unit for the convenience of use.

Tool box for maintenance kit

Larger filer and more transparency

Larger filer and more transparency

When desoldering, flux is also suctioned. Flux can cause degradation of suction performance if it enters inside the pump. To avoid the degradation, filter is attached on the front panel. The new filter is larger than the previous type to enhance greater adsorption property. Also the transparent filter cover makes it easy to check filter condition.

Featuring a large LCD display

Very easy to see temperature on the large LCD display
Vacuum indicator to check clogging

Featuring a large LCD display

Lineup of nozzles for large components

Nozzles applicable to shapes like 2 mm or larger diameter lead or flat termination are lined up.

Lineup of nozzles for large components

仕様

Model No.

FR-400

Power consumption

320W

Temperature range

350 to 500ºC

Temperature stability

±5ºC at idle temperature

・Station

Output voltage

AC 29V

Vacuum generator

Double cylinder type

Vacuum pressure

Max. 80kPa (600mmHg)

Suction flow

15L/min.

Dimensions

160(W)×137(H)×235(D)mm

Weight

5.7kg

・Desoldering Tool

Power consumption

300W (29V)

Nozzle to ground resistance

<2Ω

Nozzle to ground potential

<2mV

Heating element

Composite heater

Standard nozzle

Φ1.0mm type (No.N60-02)

Cord length

1.2m

Total length

183mm (with Φ1.0mm nozzle)

Weight

245g (with Φ1.0mm nozzle)

* The suction flow is measured at the filter case suction port of station.
* Total length and weight (w/o cord, hose)