FMX-003 Electrostatic Fieldmeter

FMX-003 Electrostatic Fieldmeter

The FMX-003 measures static voltages within +/- 22kV (22,000V) at a distance of 1". Results are simultaneously displayed numerically and in bar graph format. POWER on/off, ZERO adjustment, Ion Balance (IB) and HOLD are all push button operation. The HOLD button allows the display to retain the static charge reading. This is especially useful where display is difficult to see during measurement.

Two LED guide lights help position the fieldmeter at the right distance from a charged test object. The conductive case and ground snap facilitate grounding for accurate measurement. The circuitry of the FMX-003 has been designed to make measurements in areas using air ionization.

Easy to read, easy to use operations
Lightweight, compact design
Range light assures accurate and repeatable measurements
Automatic range switching up to ±22kV(22,000V) at 1" (25mm)
Digital and bar graph display
Automatic power off after five minutes (may be disabled if preferred)

Typical Use / Specifications / Download Files

Specifications:
Part Number:	4010724

Download PDF

Tester for Wrist Strap HAKKO 498

Can be used any where to quickly and easily check a variety of grounding systems.
	Ensures employee safety.
	Eliminates product defects caused by static electricity.

Top of page

Part No.	Packing List
498	Main unit, Dry battery, Grounding wire(2.5m)

*Battery is trial on indication of the packing list.

HAKKO 498 should be calibrated regularly as a Meter/Tester.
For details, please ask us or the distributors in your country.

Model No.	498
Power Supply	9V Dry Battery
Operating Environment	0 to 40°C(32 to 104°C), 20 to 90%RH, no dew formation
Grounding Wire	2.5m

LED Indication	Calibration Resistance	Buzzer
Power LOW (Red)	R< 800K ohm	OFF
GOOD (Green)	800K ohm R 9M ohm	ON
HIGH (Red)	R> 9M ohm	OFF
Operating Environment	R> 0 to 40°C(32 to 104°F), 20 to 90%RH no dew formation

Tester for antistatic shoes
	The shoes and body can be simultaneously tested.
	Meets the JIS T8103 standard.
	The judgment is indicated by a lamp and electronics sound.
	The judgment range is selectable from two modes: 1 x 108 Ω or 1 x 109 Ω (with the selector switch).

Top of page

Part No.	Packing List
No.441B	Main Unit, Test Plate, Mounting Base, Mounting Grips (2 pcs), Wood Screws (2 pcs) and Pan Head Screws (2 pcs)

HAKKO 441B should be calibrated regularly as a Meter/Tester.
For details, please ask us or the distributors in your country.

Judgment	Resistance Range (Ω)		Indicator	Buzzer
Judgment	108Ωmode	109Ωmode	Indicator	Buzzer
LOW	R < 1 x 105	R < 1 x 105	Red lamp	OFF
GOOD	1 x 105 >= R >=1 x 108	1 x 105 >= R >=1 x 109	Green lamp	ON
HIGH	1 x 108 < R	1 x 109 < R	Red lamp	OFF

Measurement Voltage	25 VDC
Operating Environment	0 to 40°C, 20 to 90%RH, no dew formation
Power Cord	Vinyl cord (2 m)
Dimensions	Main unit: 120 (W) x 170 (D) x 45 (H) mm Test plate: 300 x 300 mm Cord length: 1.6 m
Weight	Main unit: 750 g (including mounting plate) Test plate: 1.8 kg

HAKKO 441B enables to control shoe wear, dirt and service conditions by classifying the JIS T8103 standard range into the following three levels:
Indication	Resistance Range* (Ω)		Status
Indication	108 Ωmode	109 Ωmode	Status
I	1 x 105 to 1 x 106	1 x 105 to 1 x 106	Sole is worn out.
II	1 x 106 to 1 x 107	1 x 106 to 1 x 107	Good
III	1 x 107 to 1 x 108	1 x 107 to 1 x 109	Sole is dirty.
*Reference value

Top of page

Part No.	Part Name
C1137	Stand

*The picture shows that HAKKO 441B main unit test plate and stand are assembled.

Top of page


HAKKO 441B is easy to use. Wear antistatic shoes, stand on the test plate, and press the pad. The main unit can be placed on a table or mounted to a wall surface with the mounting base included in this product.

Home | About Us | Contact Us | Sitemap

Web Design by ATI