Tsutsumi AUTOMATIC SOLDERING UNITS TI 652 & 632

Click on above image to view full picture

More Views

  • Tsutsumi AUTOMATIC SOLDERING UNITS TI 652 & 632

Tsutsumi AUTOMATIC SOLDERING UNITS TI 652 & 632

Tsutsumi Automatic Soldering Equipments

The Tsutsumi TI-652 is a soldering iron. It has a rotary cylinder which controls and ensures smooth vertical motion of the tip. The cylinder uses an S character curve control. This control reduces the scattering of solder ball during operation. It also reduces the up-down motion of the tip, thus reducing the tact time. The iron has a stroke length of 8mm.


The Tsutsumi TI-632 is a soldering iron. It has a direct dynamic cylinder .The iron has a stroke length of 15mm.


Soldering tips TKN or TKH can be used.Optional accessories improve the performance of the iron. It uses a ceramic heater TH-6-70-100. It uses the thermocouple unit TCA-16. The heater and thermocouple unit must be purchased separately along with the soldering iron. Another optional accessory is the holding arm for the iron. For point soldering, holding arm TR-621 can be used. Optionally, Ruby Nozzle TNZ-3 can be used to precisely supply solder wire to the soldering tips. 

OR
 
 

It is S character curve control built-in.

 

It is the ゛Light touch mechanism ゛ built-in of the tip which attaches out load mitigation.

 

It contributes to tact time shortening by shortening of Up-and-Down motion stroke of the tip.

Model No.

TI-652

Weight

0.4Kg(Excludes soldering tip and Heater)

Drive method

Rotary cylinder

Stroke

8mm stroke

Soldering tip used

TKN or TKH type

Heater used

TH-6-70-100 (Ceramic heater)

Optional parts

IRON Holding Arm

·for point soldering/ TR-621

·for slide soldering / TR-623

Ruby nozzle(TNZ3-□□□)*It is a nozzle with being highly efficient for carrying out wire solder to the tip

 

 

It is the ゛Light touch mechanism ゛ built-in of the tip which attaches out load mitigation.

Model No.

TI-632

Weight

0.4Kg(Excludes soldering tip and Heater)

Drive method

Direct dynamic cylinder

Stroke

15mm stroke

Soldering tip used

TKN or TKH type

Heater used

TH-6-70-100 ( Ceramic heater)

Optional parts

IRON Holding Arm

· for point soldering TR-621

Ruby nozzle(TNZ3-□□□)*It is a nozzle with being highly efficient for carrying out wire solder to the tip

 

(Note) Since Heater/TH-6-70-100 and CA unit (Thermo-couple)/TCA-16 are not attached to the "IRON UNIT", it is necessary to purchase separately.