Tsutsumi Mcross TX m444A 4 Axis Soldering Robot

Click on above image to view full picture

More Views

  • Tsutsumi Mcross TX m444A 4 Axis Soldering Robot

Tsutsumi Mcross TX m444A 4 Axis Soldering Robot

Tsutsumi Automatic Soldering Equipments

The Tsutsumi miCross TX- m444 is a soldering robot used for point and slide soldering. The X, Y, and Z axis have 400X400X100 mm range of operation, which corresponds to 200X200X100 mm range of motion. The base of the robot is made of aluminum to give it good rigidity. It has servo motor and a ball screw which help in achieving accurate repetitions and improving the carrying capacity. It has a simultaneous 4-axis PTP control. It also has simultaneous 3-axis PTP and CP functions.  It has MAXEED TS-621controller which is used to check and adjust feeding amount, feed rate, and temperature of soldering wire. 


 It enables registering of up to 48 soldering programs. 99 soldering conditions can be added. The computer software TSCOWin manages the data required for soldering on a computer. It has a large data storage capacity, up to 6000 program steps and 3000 positions of points can be stored.


 Optionally attach the “Solder Pre-heater” TW-210 and “N2 Jacket” TJ-600 accessories to ensure lead free soldering. The teaching pendant TTP-822 is also available as additional accessory.

OR

 

High Rigidity 4-axis Tool

 

In the robot main body, the range of operation secured 400*400*100(X,Y and Z-axis) with the size of 530*570.>>Range of motion 200*200*100(X, Y, and Z axis) can correspond.

 

The extrusion material of aluminum was used for a robot’s base, and high rigidity was realized.

 

Using of a highly precise Ball screw and a highly precise servo control motor realized high repetition accuracy and payload capabilities.

 

“Solder Pre-heat” and “N2 Jacket” which are effective option for Lead-free soldering can be attached.

 

A tool part can perform PTP and CP, and correspondence also in simple slide soldering is possible for it as well as point soldering.

 

The various function controller, MAXEED is incorporated. 
The number of times, such as solder supply and heating time, can be set freely, and set of the solder amount at the time of slide soldering is also easy.

 

“TSCO”, is applied to “Windows”, can be used.

Model No.

mCROSS(TX-m 444)

Power requirement

AC100V ±10% 50/60Hz 1.0KVA

Ambient temp. Humidity, Environment

0~40с(Non-condensing, no corrosive gas and no significant dust.)

Air pressure

0.4 ~ 0.5MPa ( 4 ~ 5kgf/c ㎡) Dry air

Movement method

PTP ・ 4-axis simultaneous control ( Equipped with simultaneous 3-axis PTP and CP functions )

Drive system

Pulse motor, Ball screw drive

Robot performance

 

Stroke

Position repeatability

Max. speed

X-axis

400mm

±0.02mm

600mm/s

Y-axis

400mm

±0.02mm

600mm/s

Z-axis

100mm

±0.02mm

300mm/s

R-axis

360°

±0.2

360°/s

Program capacity

48programs

Data storage capacity

No. of program steps: 6000steps ・ No. of points: 3000position

Teaching method

Direct teaching by MDI and Jogging operations with Teaching Pendant, TTP-822 (Option).

No. of soldering condition

99 blocks. Free program method.

Soldering operation

Point soldering and slide soldering

Weight

48kg

 

(*) Teaching Pendant/TTP-822 is option.